LifeSpan R5i Owner's Manual page 22

Step 5: Seatback / Armrest Assembly
Make sure seat is locked and remove wire ties from Connectors (H) and (I).
A. Plug Connectors (H) from
the top of Seat Mount (14)
to Connectors (I) from the
base of the Seatback/Arm-
rest Assembly (5).
NOTE:
It does not matter which
connectors plug into each
other as long as both
connectors are plugged in.
B. Push excess wiring into
the Seatback/Armrest
Assembly (5) wire hole.
NOTE:
Be careful not to pinch the
wiring when securing the
Seatback Assembly (5) to the
Seat Mount (14).
C. Align the Armrest Tube (J)
with the corresponding
Bracket (K) and insert into
the bracket.
D. Install the two M10x55L
Carriage Bolts (20) through
the Bracket (K) and the
Armrest Tube (J).
E. Install the two M10 Wash-
ers (21) and M10 Nuts (22)
onto M10x55L Carriage
Bolts (20) and securely
tighten.
Assembling Your R5i Recumbent Bike
NOTE:
I
14
20
14
K
5
H
J
21
22
23