Assembling Your R5i Recumbent Bike
Step 1: Remove Components from Box
A.
Remove plastic bags and lay all parts out on the floor.
B.
Locate the hardware bag.
Step 2: Rear Support Assembly
A.
Align the Rear Support Assembly (3) with Rear Bracket (B).
B.
Set the rear of the main frame assembly on the Seat (9) with the seat's
bolt holes facing upward as shown below, this will raise the frame
making it easier to install the Rear Support Assembly.
Install three M8x16L Bolts (19) through the Rear Support Assembly (3) and
C.
into the Rear Bracket (B). Do not fully tighten the bolts until all three
bolts are installed.
D.
Securely tighten the top bolt first, and then the two side bolts.
20
9
19
B
19
3