Getting To Know The App - Rehau NEA SMART 2.0 Service Manual

Step 3:
Upon successful completion of the registration, the base station must
be registered with the App. There are two ways to do this:
1. Scanning the QR code that is printed on the base station.
2. Entering the identification number and confirming.
Fig. 8-27 App: Scan code on the base
Step 4:
Confirm by briefly pressing the OK button.
<
Fig. 8-28 App: Confirm
86
OK >
< 1 sec
Step 5:
The overview screen of the App opens, and the individual rooms are
displayed. The App can now be used.
Fig. 8-29 App: Overview rooms
8.3.3

Getting to know the App

After successful pairing of App and NEA SMART 2.0 installation, the
app will show the start screen with all the rooms of you installation.
The main navigation bar at the bottom of the screen guides you
through the four main areas of the app:
- Home
- Timing programs
- Statistics
- More