General Settings; Choose System Type - Rehau NEA SMART 2.0 Service Manual

7.5.4

General settings

The wizard automatically starts once your browser opens the page
192.168.0.2.
Please follow the instructions in the browser and avoid going back and
forward.
On first screen you may set:
- Your language
- Building type (residential or commercial): This selects the appropria-
te daily programs for weekly program#1 for the room temperature
set points.
- Building type standard or low energy:
This selects appropriate setting for the heat curves (details can be
found in chapter 9 Parameters)
- Date of installation and system date and time are taken from the
device which is used for configuration
Fig. 7-9 Webpage: General settings
58
7.5.5

Choose system type

Before continuing, please ensure that the conditions listed on this
page are fulfilled.
- Simple installations have only 1 NEA SMART Base 2.0, optionally
with one NEA SMART 2.0 R-Module
- Installation with at least 1 system bus component (U-Module or
another Base) are complex installations
If you choose simple installation, the wizard continues at point 7.5.14.
Fig. 7-10 Webpage: Choose system type