Definition Of Outputs Of The Base; Definition Of Inputs Of The Base - Rehau NEA SMART 2.0 Service Manual

7.5.15 Definition of outputs of the Base

The screen below shows the default output configuration of a master.
The function of each of the below options is described in chapter 5.3.5.
Fig. 7-26 Webpage: Master, output configuration
In our example, additional output signals are added:
Fig. 7-27 Webpage: Master, output configuration (Heating, Cooling)
The signals "Heating" and "Cooling" may be used to control valves
which open or close the pipes coming from boiler and chiller.

7.5.16 Definition of inputs of the Base

By default, there are no input signals defined. The options are shown
below. The function of each of the below options is described in
chapter 5.3.6.
Fig. 7-28 Webpage: Master, input configuration
In our example, these input signals have been added.
Fig. 7-29 Webpage: Master, input configuration
Note:
Dew point signal and "Window open" are defined to be OK (no dew
point alarm, window is closed) when the signal is active.
This means, the potential free contact connected to this input is
closed in OK state.
65