Rehau NEA SMART 2.0 Service Manual page 84

The naming of the dehumidifiers is:
U-Module Dehumidifier
Device to which
dehumidifier is
connected
Please note:
The pre-defined settings for reduced mode were chosen so, that during
this phase dehumidifiers should not run under normal conditions. The
idea behind that is to avoid noise pollution during the night.
If noise is not a problem, the settings for reduced mode should be
modified or the weekly program should be deactivated
(see U-Module Dehumidifier 2.1)
Diagnosis / calibration
Fig. 8-21 Webpage: Diagnosis / Calibration
Configuration overview
Fig. 8-22 Webpage: Configuration overview
84
1 1
Adress of 1st or 2nd
U-Module dehumidifier on
U-Module
State of inputs / outputs
Fig. 8-23 Webpage: Sate of Inputs/Outputs
Probe calibration
Fig. 8-24 Webpage: Probe calibration