Example For Configuration - Rehau NEA SMART 2.0 Service Manual

7.5.3

Example for configuration

The following configuration sequence is based on an installation with
1 NEA SMART 2.0 Base
1 NEA SMART 2.0 R-Module
2 NEA SMART 2.0 U-Modules
Characteristics:
- There are 4 rooms: 2 of them have underfloor heating and ceiling
cooling, the other 2 only underfloor heating.
Fig. 7-8 Scheme for example configuration
- The 2 rooms which are cooled have each one a dehumidifier
- 1 mixed circuit supplies one manifold for underfloor heating and one
manifold for ceiling cooling
- Actuators installed on the manifold for underfloor heating are
connected to NEA SMART 2.0 Base
- Actuators installed on the manifold for ceiling cooling are connected
to NEA SMART 2.0 R-Module, which is installed directly beside the
manifold
57