Rehau NEA SMART 2.0 Service Manual page 81

Access to installer main menu
The installer area may be entered from user menu:
Fig. 8-12 Webpage: User menu
The password are the first 8 characters of the unique code. The
unique code can be found:
- on the label that is at the bottom of the NEA SMART 2 Base, or
- on the web page "System" that is shown in the screen above (see
also chapter 7.6.3)
Installer main menu:
Fig. 8-13 Webpage: Installer main menu
The following pages show the installer menus as they
exist in the example described in the installation sequence
in chapter 7.
For detailed information about the displayed parameters see
chapter 8.
In this chapter the following menu items are not described:
- "System set up procedure":
This starts the wizard again
This can be used to see the detailed configuration of the system also
without changing anything.
see chapter 7
- "Rooms"
see chapter 7.6.2
- "Timer programs"
see chapter 7.6.2
Settings
Fig. 8-14 Webpage: Settings
Heating / Cooling settings
Fig. 8-15 Webpage: Heating / Cooling settings
81