Enter System Components And Functions - Rehau NEA SMART 2.0 Service Manual

7.5.6

Enter system components and functions

The inputs on this page are used to check in terms of
- what will be found, when the components of the system are scanned
later
- what you define during the wizard run
Number of outside sensors:
If you define more than 1 outside sensor, the average value is taken.
Outside temperature from server used:
This option allows to omit a wireless outside probe; the information is
taken from the server.
Please note:
To use this, the system has to be online and the address of the
installation has to be set in the NEA SMART 2.0 App.
Fig. 7-11 Webpage: System components
If you choose a system configuration which is not possible, you will
get an error message:
Fig. 7-12 Webpage: Too many rooms
Maximum number of rooms is 12, because one Base works with
8 rooms and the R-Module works with additional 4 rooms.
Fig. 7-13 Webpage: Configuration not possible
For 1 mixed circuit and 2 dehumidifiers, there are 2 U-Modules
needed!
59