Operating Of Nea Smart 2.0 System - Rehau NEA SMART 2.0 Service Manual

8 OPERATING OF NEA SMART 2.0 SYSTEM

The NEA SMART 2.0 System can be operated and monitored by user,
installer and service company using
- NEA SMART 2.0 Room units
(change set points, operating mode ...)
- Integrated web pages
(set up, parametrization, timer programs, room set points..)
- NEA SMART 2.0 App
(full range of operating, parametrization and statistics)
The widest range of possibilities and highest comfort offers the NEA
SMART 2.0 App. To use the App, the system must be connected to
internet.
Feature
Change actual temperature set points, select normal /
reduced / standby / party mode for one room
select normal / reduced / standby / party and holiday
mode for all or a group of rooms
Manage timer programs, room temperature set points in
timed mode
Manage dehumidifiers
Set up a system
Change parameters
Get messages about problems
Get statistics, temperature curves ...
Use smart functions as geofencing
Tab. 8-1 Operating via different devices
72
The integrated web pages can be accessed by one device only.
Internet connection is not needed, and in this mode also not possible.
Operating by room units is always possible and does not exclude, to
operate the system in parallel by App or web pages.
The table below gives an overview about the features and limits of the
different operating methods.
Room unit
YES
NO
NO,
but predefined set points
can be changed
NO
Only room temperature
control heating without
timer functions
NO
Only critical as
condensation
NO
NO
Web pages / Wizard
YES
YES,
with some restrictions
YES
YES
YES configuration must be
done with web pages
YES,
with some restrictions
Only error codes
NO
NO
App
YES
YES
YES
YES
NO,
YES
YES
YES
YES