Practice Exercise
Now that you've read about changing margins and tabs, you may wish to practice it.
The document you'll type is shown on the next page. Use the instructions below to
start the document file.
MAKE sure your training disk or an initialized disk is in the B Drive
IF the Directory of B is not displayed, change to drive B
•
Press B
•
Type B:
•
Press RETURN
CHECK the number of files on the B disk
•
Count the files (if the disk already has the maximum number of
files, get another disk or delete some of the files, using the
instructions on page 3-2)
CHECK the disk space on the B'disk
•
Press the H key
•
Type STAT
•
Press RETURN
•
Check the "Bytes Remaining On B:" message (if it is less than 4K,
delete one or more of the files, using the instructions on page 3-2)
•
Press any key to return to the Directory
START a new document file named MARGINS
•
Press the A key
•
Type MARGINS
•
Press RETURN
CHANGE the left margin to 20
•
Press CTRL &. 4
•
Press the D key
•
Type 20 and RETURN
CONTINUE with the instructions on the next page.
FORMATTING
5-7