Table of Contents
Advertisement
TYPE
the letters LA and press the RETURN key.
Result
When Word Processing is ready to be used (in about 10-15 seconds), you'll
see the words "This is the Directory Menu" at the top of the screen. (If
this does not appear, take the disk out and reinsert it according to the
illustration on page 15-2. Then press the RESET button on the back of the
screen, type LA and press RETURN.)
OBTAIN
a new disk and take the write protect tape off of the
5~"
disk, or put a
write protect tape on the 8" disk (if you don't have a new disk, a
previously used one will do).
WRITE
PROTECT
TAPE
TYPE
CUTOUT
OVAL
5~"
DISK
the letter H
L
~
[JII
-
[
0eQ)
c::::J
8"DISK
UP AND IN
ARROWS
~
WRITE
PROTECT
TAPE
WAIT
for the word COMMAND to appear in the middle of the screen.
The
system is asking you which program you want to run.
TYPE
WAIT
INSERT
the word INIT and press the RETURN key.
for the message "Enter physical disk drive to initialize (A or B)"
the new disk in the right drive (drive B), type the letter B
The following message to be displayed on the screen:
Available disk formats are:
1)
Single Density, Single Side
2)
Single Density, Double Side
3)
Double Density, Single Side
4)
Double Density, Double Side
Enter desired format, or ESC to re-enter selections
DIAGNOSTICS
15-3
Advertisement
Table of Contents
