Table of Contents
Advertisement
nCI/nC3: This switch is used to allow the printer to operate with much faster
host systems without loss of data. When ON, special characters (DCl/DC3) are
transmitted between the printer and the host automatically whenever the print
buffer is either nearly full or nearly empty.
When OFF, an operation called ETX/ ACK is enabled which is similar to
DCl/DC3.
PARITY ON-OFF: This switch enables parity checking and parity information
transmission when on.
.
.
PARITY ODD-EVEN:
This is used in conjunction with Parity ON-OFF to
determine the nature of parity information handling.
110-300 BAUD: This switch selects 110 or 300 Baud as the speed at which the
printer will receive and transmit data.
If
1200 Baud is selected (OPTION switch
ON), this switch doesn't have any affect on printer operation.
For use with the Xerox 820-11, all the switches should be positioned to the right
of the printer except for switches 2 and 8. They should be positioned toward
the left of the printer.
SYSTEM COMPONENTS
14-21
Advertisement
Table of Contents
