Table of Contents
Advertisement
TOO LITTLE MEMORY TO COpy WHILE EDITING
Reason 1:
Reason 2:
Action 1:
Action 2:
This message displays when your system does not have enough
memory available to copy files while editing.
This message displays when the disk on which the print output
file is being written becomes full. This automatically causes the
print to pause. PRINT PAUSE appears at the top of the screen.
You have reached your limit of 64 on
5~"
or 128 on 8" files and
editing capabilities have utilized all the disk space available.
If
you want to copy a file, you must first end (CTRL
&
3
+
G) or
abandon (CTRL & 3
+
ESC key) the current file.
More disk space has to be made on the disk before you can do
any more printing from the disk. Deleting files from the disk
that are no longer needed will free up disk space.
SERIOUS ERROR F27
Reason 1:
This message displays when you try to put more than 64 on
5~"
or 128 on 8" files on the disk at one time.
Action 1:
Unfortuna tely, the file was not saved on the disk and you will
have to type the file again.
Prevention:
Always check the available disk space before starting a new file
or editing a previous one.
WAITING TO PRINT
Reason 1:
Action 1:
This message displays when you attempt to print a file and your
printer has not been turned on.
Turn the printer on.
If
you have the Xerox 40 CPS printer, the
on/off switch is in the upper right corner on the back.
If
you
have a 25 CPS printer, the on/off switch is in the lower right
corner on the front.
WORD TOO LONG TO FIT MARGINS -- PLEASE HYPHENATE
Reason 1:
Action 1:
This message displays when a line is formed with more
characters than the system can fit between the currently set left
and right margins with no word break (space or hyphen).
•
•
•
Hyphenate (-)
Move cursor to end of word and press RETURN to keep
word on same line
CTRL & 0
+
6, puts the word on next line and continues
reformatting. MESSAGES
16-9
Advertisement
Table of Contents
