Table of Contents
Advertisement
Within a few seconds, your system will tell you how many
remaining BYTES are left on the disk.
See page 3-5 in the Reference Guide for more information.
PROBLEM:
HYPHENATION. You do not want to hyphenate but you want to
keep reformatting.
Reason 5:
During editing, if a repeat reformat command has been given and
the system asks for a hyphenation decision, the keystroke
cancels the reformat command.
Action 1:
H you do not want to hyphenate at that time, type a CTRL
+
0,
CTRL
+
6 and the action will continue.
Action 2:
However, if you are reformatting and a hyphenation decision is
encountered; type in the hyphen.
REMEMBER, you have to
repeat the command given after any keystroke that interrupts
the action.
PROBLEM:
SOFTW
ARE WON'T LOAD
Reason 6:
The left side of the console is referred to as the "A" drive. It is
also the side the "software" is inserted. The right side of the
console is referred to as the
"B"
drive. It is where the "working
disc" is normally inserted.
If you have not inserted the discs
according to the above reasons, you cannot load the software.
Action:
Make sure you have loaded the correct discs in the proper drives.
Result:
You can now load' your software.
PROBLEM:
PITCH
Reason 7:
H you forget to change your printwheel and change the setting
on the printer, your file will not print correctly.
Action:
H you want to print in 10 pitch, change pitch - 10 to 12; or if
want to print in 12 pitch, change pitch - 12 to 10.
Prevention:
Be sure you change your printwheel and change the setting on
your printer before you print a file.
PROBLEM SOL VING
17-3
Advertisement
Table of Contents
