Table of Contents
Advertisement
Practice Exercise
This exercise will give you a chance to practice using the commands on the Go To
Menu to move the cursor. You'll use a document file that is already recorded on your
Training Disk.
BEGIN with the Directory Menu on the screen
MAKE sure your Word Processing Disk is in Drive A and your Training Disk is in
Drive B
CHECK that the Directory of the B disk is displayed. (If it is not, press the B
key, type B: and press RETURN).
BRING the document file named EDIT to the screen
•
Pre ss the A key
•
Type EDIT
•
Press RETURN
MOVE the cursor to the end of the file using the Go To Menu command
•
Press CTRL & 1
•
Look at the menu and notice that it shows C = end of file
•
Pre ss the C key
MOVE the cursor back to the beginning of the file
•
Press CTRL & 1
•
Look at the menu and notice that it shows 0
=
beginning of file
•
Press the D key
ON YOUR OWN, try using some of the other commands on the Go To Menu
(Note:
The 0-9 command only works after you set a place marker;
BACKSP only works after you've moved text; and G and I only work when
you have a block of text marked. All other commands work at any time.
If
you give a command that cannot be carried out, a message will display
asking you to press the ESC key.)
PRACTICE moving the cursor with the cursor (arrow) keys
MOVE the cursor back to the beginning of the file
LEA VE the document file on the screen while you read the next three pages,
then -continue with the exercise on page 2-7
CURSOR MOVEMENT
2-3
Advertisement
Table of Contents
