Table of Contents
Advertisement
powered up and before Word Processing prints, you may, in unusual cases, find
it necessary to press the printer's "clear" button, or to turn the printer off and
on, before Word Processing will print correctly (this is because the Diablo
1510/20 has not provision for a full reset initiated from the system).
Installation:
When installing Word Processing to use a Diablo 1610/1620
printer interfaced at 1200 baud (120 characters per second), specify
"ETX/ ACK" protocol, and a driver capable of inputting characters.
No
settings are required on the printer for 'ETX/ ACK operation. These printers do
not support XON/XOFF protocol.
Compatible Typewheels for the Diablo 1610/1620 include:
Diablo 38100
Diablo 38107
Diablo 38101
Diablo 38102
Qume 82167
Diablo 1640/1650
Courier 10
Courier 72
Pica 10
Elite 12
Prestige Elite 12
Features: Form feeds cannot be used with the Diablo 1640 and 1650: the USE
FORM FEEDS questions does not occur in the print initiation dialog when Word
Processing has been installed for a 1640 or 1650.
Installation:
When installing Word Processing to use a Diablo 1640/1650
printer interfaced at 1200 baud (120 characters per second), specify
"ETX/ ACK" protocol, and a driver capable of inputting characters. A switch
setting may be necessary inside the printer to enable ETX/ ACK protocol.
These printers also support XON/XOFF protocol (Diablo calls it DC 1/DC3
protocol); a switch setting is necessary inside the printer to eanble this
protocol (Switch 3 on HPR04 circuit board) or as described in your Diablo
manual.
Compatible Typewheels for the Diablo 1640 are as listed above for the Diablo
1610/20 above.
Qume
Sprint 5
Installation:
When installing Word Processing to use a Qume Sprint 5
interfaced at 1200 baud (120 characters per second), specify "ETX/ ACK"
protocol, and a driver capable of inputting characters.
No settings are
required on the printer for ETX/ ACK operation. The Qume Sprint 5 does not
support XON/XOFF protocol.
Compatible Typewhee1s for the Qume are as listed above for the Diablo
1610/20.
NEC Spinwriter 5510/5520
Features: The "spoke 20 spoke 7F features are not supported on, nor relevant
to, these printers.
REFERENCE
13-31
Advertisement
Table of Contents
