Unpacking - Xerox 820-II Word Processing Applications And Reference Manual

Hide thumbs Also See for 820-II:
Table of Contents

Advertisement

UNPACKING THE 630 PRINTER (40 CPS)
1.
Take the printer and all accessories out of the carton and remove the plastic
dust bag. Place the printer on a desk or table.
NOTE: The weight of the 40 CPS printer is centered toward its right-rear (as
you look at it); thus it is easiest to lift by holding it at the right-rear and left-
front.
2.
Inspect the printer and any accompanying accessories for evidence of shipping
damage. Immediately notify the shipping agent of any damage to the unit or its
parts.
3.
Remove the access cover. It is held in place by magnetic latches in front and
small tabs in back.
4.
Remove the plastic bag and the CAUTION tag attached to the paper bail by
cutting or removing the tie wrap (nylon strap).
5.
Remove or cut the following shipping restraint
items,
if installed (see pictures
on opposite page):
a)
Rubber band securing the cover open switch actuator.
b)
Rubber band securing the paper cradle to the paper pressure rollers (if no
platen is installed).
c)
Tie wrap (nylon strap) holding the carriage to the right printer frame.
CAUTION: DO NOT cut any other tie wraps!
SYSTEM COMPONENTS
14-26

Advertisement

Table of Contents
loading

Table of Contents