Table of Contents
Advertisement
LOCATE
the cable that came with your printer kit.
Notice that one end of the
cable has two small plugs, with a ground wire coming off the first plug.
PUSH
the second small plug on the cable down on the printer port inside the
820-11, as shown below. Be sure that the plug covers both rows of pins,
then push the plug down firmly.
GROUND WIRE
FIRST PLUG
J8 PRINTER PORT
INSIDE 820
LOCATE
the ground wire.
(not used)
PUSH
the two ground wire connectors onto the pins in front of and to the left of
the first jumper you installed earlier. Be sure the ground wires connect to
the exact pins shown in the illustration below.
GROUND WI
CQNI\ECTORS
SYSTEM COMPONENTS
14-50
Advertisement
Table of Contents
