Table of Contents
Advertisement
Paper Handling Features
1.
Platen Knob - This knob, when pushed in to disengage the drive gear, allows
rotation of the platen to insert and position paper.
2.
Platen Release Latches - These two latches are pressed down to release the
platen for removal or when inserting a platen.
3.
Platen - The platen is similar to those on standard office typewriters. The left-
hand platen knob pushes in (to disengage the drive gear) for manual setting of
paper position.
4.
Paper
Bail
Lever - This lever is used to move the paper bail forward to allow
loading of paper, and then back again to its operating position.
5.
Paper
Bail -
The paper bail holds the paper against the platen for optimum print
quality and quietness. The bail must be moved forward away from the platen
using the paper bail lever when inserting paper.
6.
Paper Release Lever - This lever releases paper roller pressure when pulled
forward, allowing paper to be positioned manually. Returning this lever to its
rearward position re-establishes paper roller pressure.
7.
Paper Scales
Bar -
The scales on this bar aid in centering and spacing paper and
copy.
The bar itself helps direct the paper down behind the platen during
insertion.
4
2
/
1
7
SYSTEM COMPONENTS
14-8
6
I
3
Advertisement
Table of Contents
