Table of Contents
Advertisement
PROGRAMS AVAILABLE ON THE DISK
The following
is
a list of the programs on the Word Processing disk. Complete instructions
for using the programs are given in the DIRECTORY chapter of this manual.
PROGRAM
INIT
COpy
PIP
STAT
BDIR
TIME
CONFIGUR
WHATSA
KILLESC
SWAP
BACKUP
FMT
SYSGEN
INSTALL
DESCRIPTION
Used to prepare (initialize) a new disk.
Used to make an exact copy of a disk.
Used to copy a file(s) from one disk to another, or to
make copies of files on the same disk.
Used to display the status of a disk, such as disk space
available, and information about the number,
size,
and
kind of files on any given disk.
Used to display the Directory of the disk in Drive B while
remaining on Drive A (without changing drives).
Used to set and display the date and time.
Used mainly to modify the software for use with a non-
Xerox printer and to change the
size
of the partitions on
the rigid disk.
Used to show which logical and physical drives are in use
and what type of disks (density/number of sides, etc.) are
being used.
Used to disable the CTRL
+
ESC command.
Used to exchange logical disk drive assignments.
Used to backup the data on a rigid disk.
Used to format a rigid disk prior to use.
Used to copy the operating system to a rigid disk.
Used to install a non-Xerox printer.
The following is a list of programs used only by the software and programs. You should'not
erase these from the disk.
PROGRAM
TERMINAL
XERBAK
XERCOPY
XERMAIN
XWS
WSMSGS.OVR
WSOVL Y 1.0VR
DESCRIPTION
Support file for BACKUP.
Support file for BACK UP.
Support file for BACK UP.
Support file for BACKUP.
Support file for Word Processing.
Support file for Word Processing.
Support file for Word Processing.
INTRODUCTION
1-8
(
Advertisement
Table of Contents
