Table of Contents
Advertisement
Setting The Switches Under The Access Cover (left to right)
Check to be sure the printer has been set to the proper switch positions for use with a
Xerox 820-11. Check your print wheel to determine if its plastic or metal and -10 or 12
pitch. The available setting positions are as follows:
1.
Printwheel Select Switch. Set this switch to match the particular type of print-
wheel being used.
This ensures your text will print correctly and prevents
possible print wheel damage or excessive wear.
PRINTWHEEL SELECT:
0:
2:
3:
4:
5:
6:
88 Metal
92 Metal
96 Metal
96D Metal
APL Metal
APL Plastic
7:
1,8,9:
Plastic (This is the printwheel normally shipped with the printer.)
Optional
2.
Spacing Select Switch. This switch selects the horizontal spacing for character
print out.
Set this switch to 1 for 10 Pitch PWS or 2 for 12 Pitch PWS.
Proportional
0:
1:
2:
3:
10 (This is the print wheel normally shipped with the printer.)
12
15
4 - 9:
Self Test
3.
For use with the Xerox 820-11, the switches to the right of Print wheel and
Spacing switches should be positioned toward the front of the printer, except
for the BAUD switch marked 120. It should be positioned toward the back of
the printer.
PRINTWHEEL SELECT
SWITCH
, . - - 0 88 METAL
I
2 92
METAL
3 96
METAL
DRINTWHEEL
•
960
METAL
SPACING SELECT
SWITCH
SELECT
5
APL METAL
~~100.1=:~
L-
~ ~~~;TL,~ST'C
1.8.9 OPTION
SYSTEM COMPONENTS
14-37
AUOIO ALARM
Advertisement
Table of Contents
