Wavetronix SmartSensor V User Manual page 75

SmartSensor V User Guide
74
•
Lane Name – Displays the string of eight alphanumeric charac-
˿
ters that describes the lane.
Volume – Shows the number of events during the interval.
˿
Speed (MPH)– Represents the average speed of the lane
˿
during the time of the interval. The speed is displayed either in
miles per hour (mph) or kilometers per hour (kph), depending
on your settings.
Occupancy (%) – Displays the percentage of time vehicles
˿
occupied the sensor's detection zone during the selected
interval.
Classification (%) – Represents the percentage of vehicles
˿
detected as fitting in one of three length-based classification
groupings (Small, Medium, and Large).
Sensor Time – This number represents the sensor time in sec-
˿
onds, and the sensor decodes it when it needs a timestamp.
This time doesn't reset on a power cycle.