Changing The Communication Tab Settings - Wavetronix SmartSensor V User Manual

Setting
RF Channel

Changing the Communication tab settings

Setting
Baud Rates
RS-232 Port
RS-485 Port
Description
Lets you change
which radio frequency
channel the sensor is
transmitting on.
Figure 46. Communications tab
Description
Lets you set the baud
rate for the RS-232
port.
Lets you set the baud
rate for the RS-485
port.
Details
If you're using multiple
sensors within 120
feet of each other, set
each to its own RF
channel.
Details
We recommend
using the RS-232 port
for configuring the
sensor.
We recommend using
the RS-485 port for
pushing/polling data.
Chapter 6: Configuring Sensor Settings 51
•