Installing Power, Surge Protection, And Communications; Installations With A Pole-Mount Box Only - Wavetronix SmartSensor V User Manual

How you install power, surge protection, and communication mod-
ules varies based on what enclosures you're using and where
they're located.
Installations with a pole-
mount box only
As shown below, this is an installation where the sensor cable runs
down the pole to the pole-mount box and to nowhere else. Power
comes from solar, a battery, or a power line that runs straight to the
pole; communications are wireless or use a comms line that runs
straight to the pole.
Installing Power,
Surge Protection, and
Communications
Chapter 3: Installing Power, Surge Protection, and Communications
3
Warning. We strongly
recommend you
follow the guidelines
in this chapter,
especially as they
relate to surge
protection. Failure to
properly protect your
sensors from surges
will void the sensor
warranty. If you need
more information,
contact support@
wavetronix.com.
21
•