Using An Address Book - Wavetronix SmartSensor V User Manual

After opening SmartSensor Manager, select either Modem
1
(Phone #) or Internet (TCP/IP), and click OK.
In the connection window, click the address book on the right
2
side. This opens the respective entries of your last opened
address book.

Using an address book

Figure 40. Address book for modem entries
Setting
Select
New
Description
Enters a selected
entry's information
into the respective
connection window.
Creates a new
address book entry.
Details
When you are
connected to a sensor,
the Select button will
be disabled. You'll
be able to edit the
address book entries,
but you will not be
able to connect unless
you first disconnect
from the sensor.
N/A
Chapter 5: Connecting to the Sensor
Note. The connection
window is the only
way to use the
address book to
connect to a sensor.
Note. If you're adding
an Internet entry,
you need to enter
either an IP alias
(domain name) OR
an IP address. Don't
fill out both fields.
43
•