Setting Up The Pole-Mount Box - Wavetronix SmartSensor V User Manual

Note. This section
assumes you are
using the Standard
Preassembled
Cabinet from
Wavetronix. If you
bought individual
Click modules
instead, see the
knowledge base
articles found at
wavetronix.com. For
more information
about the power
plant, see article 295,
How to Assemble
the Power Plant.
If you aren't using
Wavetronix devices,
contact your dealer.
SmartSensor V User Guide
22
•
Figure 13. Installation with pole-mount box and no cabinet

Setting up the pole-mount box

Figure 14. Standard Preassembled Cabinet (pole-mount box)
Lightning
Surge
Protection
W
Click!
200
L N G
+DC -DC GND 485- 485+ GND RTS CTS TD RD GND GND