Viewing Sensor Info - Wavetronix SmartSensor V User Manual

Viewing sensor info

Make sure you're connected to a sensor.
1
Go to File > Sensor Info to open the Sensor Information
2
window, which displays the properties unique to each sensor.
Setting
Identification
Serial Number
Description
Location
Sensor ID
Description
Shows the 16-digit
serial number. It can
be used to uniquely
identify the sensor.
Shows the description
of the sensor and/or
the installation site.
Describes the location
of the sensor.
Shows the 4-digit
numeric string used to
identify the sensor on
a multidrop network.
The SmartSensor
Multidrop protocol
uses the sensor ID
to uniquely address
sensors on a shared
bus.
Details
Can't be changed.
This is set by going
to Edit > Sensor
Settings and editing
the Description field.
This is set by going
to Edit > Sensor
Settings and editing
the Location field.
This is set by going
to Edit > Sensor
Settings and editing
the Sensor ID field.
Chapter 6: Configuring Sensor Settings 47
•