Flush-Mounting Box Cp915 / Cp924 - Bender COMTRAXX CP9 Series Manual

3.1.3 Flush-mounting box CP915 / CP924

92 / 95
Maße in mm
3.1.3.1 Removing the front panel CP915 and CP924
The front panel is removed from the enclosures of the CP915 and CP924 devices by means of a suction lifter.
To do this, the tool must be positioned at the following points and the front panel removed until it snaps into
place for the first time. If the front panel is detached at all four corners, the panel can be lifted out of the en-
closure.
Damage to the display front
The front panel can be damaged by placing the suction siphon in the middle
and pulling it out at certain points.
CAUTION!
14
461 / 610
Abb. 3.2: Basic enclosure shape and dimensions CP915 and CP924
Installation, connection and commissioning
CP9xx_D00349_07_M_XXEN/01.2020