Surface-Mounting Enclosure Cp907; Flush-Mounting Enclosure Cp915/Cp924 - Bender COMTRAXX CP9 Series Manual

4.1.3

Surface-mounting enclosure CP907

For surface mounting, the flush-mounting enclosure is mounted in the optionally available surface-
mounting enclosure (B95061915).
1.5
90.2
20
Mounting procedure:
1. Assemble surface-mounting enclosure (fit hinges and bracket).
2. Insert the flush-mounting enclosure through the opening in the cover. Mount the enclosed
plastic frame from behind and screw it in place using the fasteners of the flush-mounting
enclosure.
3. Make the required cable openings in both enclosures.
4. Connect the CP907 and mount it in the enclosure.
4.1.4

Flush-mounting enclosure CP915/CP924

Mounting of flush-mounting enclosures
The supplied flush-mounting enclosures are only suitable for mounting in cavity
walls. In drywall and stud frame constructions, the enclosures must be screwed
at right angles to battens or to the stud frame structure. The enclosure must not
warp during mounting. The wall surface must be even.
92 / 95
16
299
Fig. 4.2: Enclosure for surface mounting CP907
461 / 610
Fig. 4.3: Flush-mounting enclosure CP915/CP924
Mounting, connection and commissioning
173
CP9xx_D00349_08_M_XXEN/02.2022
Hinge
Dimensions in mm
Dimensions in mm