1 July, 1998
MAIN DRIVE AND IMAGE UP/DOWN SHIFTING DRIVE SECTION
6.11.2 MAIN DRIVE MECHANISM (MAIN DRIVE TIMING BELT)
[A]
[B]
[C]
C229R501.WMF
Disassembly Procedure
1. Turn off the main switch and disconnect the power plug.
2. Remove the drum.
3. Remove the rear exterior cover (6 screws, 1 ground wire).
4. Swing out the MPU and PSU. (See 6.4 MPU and PSU Opening Procedures.)
5. Remove the pulley cover [B] and the bracket [A].
6. Remove the registration roller lifting cam [C].
6-85