Ricoh JP5000 Service Manual page 294

1 July, 1998
6.11.6 IMAGE UP/DOWN SHIFT DRIVE UNIT POSITION
ADJUSTMENT
PURPOSE: To take out any play while using the image up/down shifting
function.
[B]
1. Set the image shift arm [B] in the home position. Align the hole in the upper
plate with the elongated hole in the image shift arm [A].
2. Push the image up/down shift drive unit [C] against the image shift arm sector
gear, and secure the unit (3 screws, 3 connectors).
NOTE: 1) Set the arm without play in the vertical direction of the image shift
arm.
2) Do not push too strongly. Check if the image shift arm moves
smoothly after securing the unit. If it does not, SC05-10 will light at
power on.
MAIN DRIVE AND IMAGE UP/DOWN SHIFTING DRIVE SECTION
[A]
6-103
[C]
C229R024.WMF