Ricoh JP5000 Service Manual page 153

SERVICE PROGRAM MODE
4. Using the number keys, enter the desired Sub Menu Number (listed in the
service program table), then press the OK key on the bottom of the LCD (or the
Enter (#) key).
klqbW= klqbW= klqbW= The sub menu number can be shifted up or down by pressing the Prev. klqbW=
or Next key [A] on the bottom of the LCD.
5. Not for all sub menu items but for some, there are menus under the sub menu.
Using the Prev. or Next key [A] on the bottom of the LCD, select the desired
menu.
klqbW= These menus are not accessible by entering the number with the klqbW=
klqbW= klqbW=
number keys.
6. Follow the "Change Adjustment Values or Modes" procedure below.
klqbW= klqbW= klqbW= klqbW= To cancel the SP mode, press the Clear Modes key or the Return (or
End) key on the bottom of the LCD.
Change Adjustment Values or Modes
1. After entering the desired SP mode, pressing the OK key on the bottom of the
LCD (or the Enter (#) key). The current value or mode will be displayed on the
LCD (at the end of the second line).
2. Enter the desired value or mode using the number keys (listed in the service
program table).
klqbW= Use the klqbW= klqbW= klqbW=
3. Press the OK key to store the desired value or mode.
4. To cancel the SP mode, press the Clear Modes key or the Return (or End)
key on the bottom of the LCD.
key to toggle between + and -.
4-16
1 July, 1998