Ricoh JP5000 Service Manual page 183

6. SYSTEM ADJUSTMENT 1 July, 1998
9: 6-100 (Paper delivery table wing angle)
The machine lifts or lowers the wings depending on the paper type selected by the
user (standard, special, thick, user 1, user 2).
The settings for user 1 and user 2 depends on the type of paper that the user has
set these up for (see SP 2-400 and 2-401).
10: 6-101 (Paper clamping)
Whether the machine clamps the paper or not depends on the paper type selected
by the user (standard, special, thick, user 1, user 2).
The settings for user 1 and user 2 depends on the type of paper that the user has
set these up for (see SP 2-400 and 2-401).
11: 6-130 (Drum master clamper registration)
This determines how far after the leading edge the master is clamped.
A larger value clamps the master further away from the leading edge, and moves
the image closer to the leading edge of the paper.
Do not use this SP to adjust leading edge registration. Use SP6-2 for that.
4-46