Checking Tank Status - Mercury VesselView Manual

Checking Tank Status

The "TANK STATUS" screen displays the contents and level of each tank, up to two tanks for each engine. Refer to Section 2 ‑
Setup and Calibration to configure the tanks displayed on this screen.
a
• Each tank gauge icon shows the type of tank: water, waste, fuel, or oil.
• Tanks are labeled by their locations. Available labels are:
• Starboard 1 (S1), starboard 2 (S2), starboard 3 (S3), starboard aft (SA), or starboard forward (SF)
• Port 1 (P1), port 2 (P2), port 3 (P3), port aft (PA), or port forward (PF)
• Center 1 (C1), center 2 (C2), center 3 (C3), center aft (CA), or center forward (CF)
• The contents of each tank are color coded:
• Blue represents water
• Brown represents waste
• Green represents gasoline or diesel fuel
• Black represents oil
• Red represents critical fuel level
NOTE: Press the check button to display a dialog box showing the tank colors and tank contents. Press the " X "
button to close the dialog box.
90-8M0070299 MAY 2012
eng
b
Tank status pop-up window
a -
b -
c -
d -
d
c
26933
Section 6 - Vessel Menu
Port 1 (P1); fuel
Port 2 (P2); waste
Starboard 1 (S1); fuel
Starboard 2 (S2); water
27290
Page 89