Viewing Alarm Details - Mercury VesselView Manual

• Press the check button to open the "ACTIVE ALARMS" screen.
a
b
c
The "ACTIVE ALARMS" screen will display alarms for up to four engines. All alarms will be listed and numbered. Each
numbered alarm will list which engine is activating the fault. Each fault will be identified as "STBD," "PORT," "STBDCNTR," or
"PORTCNTR" depending on the number of engines. Follow the chart listed to identify the fault with the correct engine.
"STBD"
"PORT"
"CENTER"
"STBDCNTR"
"PORTCNTR"
Below the engine identification there will be short text to describe the fault. Details of the fault can be viewed in the "ALARM
DETAILS" screen.

Viewing Alarm Details

1. To the left of the first alarm listed in the "ALARM DETAILS" screen there will be an arrow cursor. Press the up or down
arrow on the arrow pad to highlight an alarm.
2. Press the check button to view the respective alarm history in the "ALARM DETAILS" screen.
a
b
c
The "ALARM DETAILS" screen will list the details of the alarm.
• The short text defining the alarm will be listed at the top of the screen.
• The long text, listed below the short text, further clarifies the alarm.
• The action text, listed at the bottom of the screen, instructs the operator on how to handle the alarm.
90-8M0070299 MAY 2012
eng
STBD
STBD
STBD
STBD
Single Engine
Starboard
N/A
N/A
N/A
N/A
a -
b -
c -
d -
d
34517
Dual Engines Triple Engines
Starboard Starboard
Port
N/A
N/A
N/A
a - Fault short text
b - Fault long text
c - Action text
27321
Section 4 - Main Menu
Engine identification
Arrow cursor
Fault short text
Fault icon
Quad Engines
Starboard
Port
Center
N/A Starboard center
N/A Port center
Port
N/A
Page 69