Fault Icons - Mercury VesselView Manual

Section 3 - Screen Overview and Operation
Status information such as time, speed, air temperature, and fuel consumption for example, can appear in either of three data
options. The data in these options can be arranged under the "Main" menu by selecting "Settings" > "Screen Options" > "Status
bar." Refer to Section 4 ‑ Status Bar Options.
NOTE: When "Diesel Inboard No Troll" is the power package installed, starboard and port tab status bar selection is not
available.
b
a
• The following is a list of data options available in the status bar. Depending on the power package installation, some of
these options may not be available.
Time
Speed
Speed Over Ground ("SPD OVR GND")
Sea Temperature ("SEA TEMP")
Gear
Fuel Usage
Fuel Level
Depth
Course Over Ground ("CRS OVR GND")
Bearing to Waypoint ("BRNG TO WP")
Air Temperature ("AIR TEMP")
Starboard Tab ("STBD TAB")
Port Tab ("PORT TAB")
Starboard Trim ("STBD TRIM")
Port Trim ("PORT TRIM")
Starboard Center Trim ("SC TRIM")
Port Center Trim ("PC TRIM")
Volts

Fault Icons

VesselView displays fault icons to alert the operator of any faults or warnings with an icon on the left side of the status bar. A
description of the fault or warning will appear over the other status bar options. When all systems are operating normally, a
green icon with the word "OK" inside will be displayed. There are several icons to warn the operator of system engagement or
conditions that require attention. The operator can view the fault in detail by pressing the brightness/alarm button. Refer to
Section 4 ‑ Alarms.
Page 46
c d
27077
a - Fault icon
b - Left data box
c - Center data box
d - Right data box
90-8M0070299 MAY 2012
eng