Navigating Through The Screens; Using Pop-Up Windows - Mercury VesselView Manual

Section 3 - Screen Overview and Operation
d. To see the available main screens, with the menu panel open in any of the categories, press the menu button. The
"Main" menu panel appears. When the menu button is pressed again VesselView toggles back to the category menu.
a
Calibrate
Tank
Tabs
Trim
Configuration
Factory Reset
Save Configs
Load Configs

Navigating Through the Screens

There are three ways to navigate through the various VesselView screens.
• By pressing the propulsion button, vessel button, or the environment and navigation button. The available screens in each
category can be adjusted so only a few screens appear in each category.
• By pressing the left or right arrow button on the arrow pad. This will toggle through the available screens of the selected
category.
• By pressing the menu button. The available screens in each category will appear in the menu list of data screens.
Using Pop‑Up Windows
Pop‑up windows appear within screens. Pop‑up windows show alarms, allow access to controls or functions specific to a
screen, and allow changes to settings or calibration.
Page 50
b
Settings
Alarms
Screen Options Active Alarms
Alarm History
Clock/Light
Preferences
Screen Optio Screen Optio
Screen Optio
Boat Speed
Status bar Status bar
Status bar
Warnings
Steering Steering
Steering
Units
Trim Settings
Pages On/Off
Autopilot
Units 2
Tab Settings
Trim Settings
Offsets
Autopilot
Tab Settings
Engine Status
Autopilot
Main
Favorites
a
Calibrate
b
Settings
c
Alarms
d
System Info
e
Maintenance
c d
System Info
Software Info
Hardware Info
.
.
.
e
Maintenance
STBD Engine
PORT Engine
47880
Main menu panel
a - "Calibrate" menu
b - "Settings" menu
c - "Alarms" menu
d - "System Info" menu
e - "Maintenance" menu
System Info
90-8M0070299 MAY 2012
eng