Favorites; Calibrate Menu; Tank Menu; Tabs Menu - Mercury VesselView Manual

Section 4 - Main Menu

Favorites

"Favorites" is a function of VesselView that allows the viewer to select specific screens as their favorite type of information that
will scroll through the various pages. The length of time the favorite information screen remains visible is programmable from 5–
20 seconds. Each category; "Propulsion," "Vessel," or "Environment and Navigation," has a variety of default screen layouts
with different information on each. Each screen option selected will have a heart shaped icon indicating the selection is
designated as a favorite. Favorites will not populate the category until the pages are selected as a favorite. The favorites can be
selected in the "PAGES ON/OFF" screen. The menu path is: "Main" > "Settings" > "Screen Options." The favorites duration
time can be changed in the "PREFERENCES" screen. The menu path is: "Main" > "Settings" > "Preferences."

Calibrate Menu

The "Calibrate" menu enables access to configure and adjust parameters within the VesselView for multiple types of holding
tanks, tabs, trim, helm location, VesselView location, number of engines, organize screen displays, factory reset the settings,
sensor detection, save (export) the VesselView configurations to a USB memory stick, and to load (import) saved VesselView
configurations from a USB memory stick.

Tank Menu

The "Tank" calibration menu option provides flexibility to make adjustments to existing calibration settings or to perform the
calibration process without the assistance of the setup wizard. These tanks can be configured specifically for their size, shape,
and what they contain; fuel, oil, water, or waste. The process begins with defining the purpose of each tank on the vessel. The
next screen asks for the size of each tank. The third screen asks for a location label for each tank. This label is an identifier on
the VesselView screen where the tank physically resides on the vessel.

Tabs Menu

The "Tabs" calibration procedure utilizes the same tab calibration screens used in the setup wizard. There are additional
calibration options that provide flexibility to make adjustments for the tab position sensor resistance changes as the tab is
raised or lowered. These adjustments may be necessary for the VesselView tab screen to accurately represent the positions of
the tab.

Trim Menu

The "Trim" calibration menu provides options not available with the setup wizard. There are two methods of calibrating the trim.
"DEFAULT" is a quick method and may not display the position accurately. The "MANUAL" method provides flexibility to make
adjustments for the trim position sensor resistance changes as the trim is raised or lowered. These adjustments may be
necessary for the VesselView trim screen to accurately represent the positions of the trim.

Configuration Menu

The "Configuration" calibration menu provides options to assign the VesselView a helm location and a unique device
identification number when more than one VesselView is used. It is also used to define the number of engines and select where
the engine data should be displayed on the VesselView screen.
Page 54
Setup
Main
Calibrate

Favorites

Favorites
Settings
Calibrate
Cruise Control
Alarms
Settings
Boost
System Info
Alarms
Trim
System Info
Vessel Status
Maintenance
Fuel To Wpt
47860
90-8M0070299 MAY 2012
eng