Units Setup; Tank Configuration - Mercury VesselView 7 Manual

Units Setup

Select the units of measure that VesselView will display on‑screen data; speed, distance, and volumes. Particular units of
measure can be changed later.

Tank Configuration

Select the number of fuel tanks on the vessel in the drop‑down field. Touch Next to continue.
Use the rotary knob or touch the menu fields to select the Tank source, Tank type, and Tank capacity.
90-8M0087258 DECEMBER 2014
eng
a
a
a
b
c
Section 2 - Initial Screens and Setup Wizard
a - Units of measure selection field
56748
a - Number of tanks selection field
56749
a - Tank source selection field
b - Tank type selection field
c - Tank capacity entry field
56750
Page 15