Viewing Trim Position - Mercury VesselView Manual

NOTE: Zeus and Axius drive applications show the steering angle needle from the drive with the most angle.
a
22.9
b
DEPTH
10.4
c
SPEED
NOTE: To invert the steering position, use the "INVERT STEERING" option on the "Preferences" screen in the "Settings"
menu.
• The steering position is displayed in degrees.
• Water depth and boat speed are displayed below the steering position by default. You can choose to display boat speed,
wind speed. wind direction, water depth, gear position, speed over ground ("SOG"), bearing to waypoint ("BTW").
Environment variables are only available for display on vessels equipped with these SmartCraft sensors.

Viewing Trim Position

The trim screen shows current and peak operating information.
a
d
c
• RPM is displayed for up to three gas engines or two diesel engines.
• The trim level is 0 when trimmed all the way down, 10 when trimmed to maximum safe operating position, and 25 when in
the trailer position. The propeller icon will move according to the position of the trim position.
90-8M0070299 MAY 2012
eng
23.5 MPH
SOG
STEERING ANGLE
FT
MPH
GPS
a - RPM
b - Depth
c - Vessel speed
d - Steering angle
d
45176
a - Engine RPM
b - Current trim level
c - Speed (GPS)
d - Fuel flow rate
b
26937
Section 5 - Propulsion Menu
Page 79