Load Configuration - Mercury VesselView Manual

5.
When the export is complete, a blue pop‑up screen displays the words "EXPORT COMPLETE." Press the "X" button to
exit.
6. It is now safe to remove the USB memory stick.

Load Configuration

The "LOAD CONFIGURATION" menu imports the configuration settings saved to a USB memory stick from another
VesselView unit. To "Load Configs," press the menu button until the "Main" menu appears, then use the down arrow button to
select the "Calibrate" menu. Press the check button to open the "Calibrate" menu, then use the down arrow to select "Load
Configs." Press the check button to open the "Load Configs" screen.
1. Once in the "LOAD CONFIGURATION" screen, a blue pop‑up screen displays the words "PLEASE INSERT USB
MEMORY STICK."
2. Insert a USB memory stick into the USB port on the back of the VesselView. Refer to Setup Wizard—Import
Configuration (Optional) for an illustration showing the USB port.
IMPORTANT: Do not remove the USB memory stick until the import process is complete.
3. When the VesselView detects the memory stick, the blue pop‑up screen will disappear; this may take several seconds.
90-8M0070299 MAY 2012
eng
EXPORT COMPLETE
PRESS (X) TO CONTINUE

LOAD CONFIGURATION

TANK CONFIG
TRIM CONFIG
PLEASE INSERT USB MEMORY STICK
STEERING
DEPTH CONFIGS
UNITS/APP PREF
Section 2 - Setup and Calibration
27292
IMPORT
IMPORT
EXPORT
IMPORT
IMPORT
27232
Page 29