Mercury VesselView Manual page 32

Section 2 - Setup and Calibration
1. Once in the "SAVE CONFIGURATION" screen, a blue pop‑up screen displays the words "PLEASE INSERT USB
MEMORY STICK."
2. Insert a USB memory stick into the USB port on the back of the VesselView. Refer to Setup Wizard—Import
Configuration (Optional) for an illustration showing the USB port.
IMPORTANT: Do not remove the USB memory stick until the export process is complete.
3. When the VesselView detects the memory stick, the blue pop‑up screen will disappear; this may take several seconds.
4. The screen shows all the categories which will be exported. It is not possible to select only one or two specific
configurations when exporting information. All of the files in the list will always be exported. Press the check button to
initiate the export.
a
TANK CONFIG
b
TRIM CONFIG
c
STEERING
d
DEPTH CONFIGS
e
UNITS/APP PREF
Page 28
SAVE CONFIGURATION
TANK CONFIG
TRIM CONFIG
PLEASE INSERT USB MEMORY STICK
STEERING
DEPTH CONFIGS
UNITS/APP PREF
SAVE CONFIGURATION
EXPORT
EXPORT
EXPORT
EXPORT
EXPORT
EXPORT
EXPORT
EXPORT
EXPORT
EXPORT
27230
a - Tank configuration
b - Trim configuration
c - Steering
d - Depth configuration
e - Units and application preferences
27297
90-8M0070299 MAY 2012
eng