Mercury VesselView Manual page 34

Section 2 - Setup and Calibration
4. The screen shows the configuration categories. Select either "IMPORT" or "SKIP" using the left and right arrow buttons.
a
TANK CONFIG
b
TRIM CONFIG
c
STEERING
d
DEPTH CONFIGS
e
UNITS/APP PREF
5. Press the down arrow button to proceed to the next configuration category. Select either "IMPORT" or "SKIP" for each of
the categories.
6. Press the check button to save the selected configurations. The VesselView will restart and finish loading the configuration.
Page 30
LOAD CONFIGURATION
IMPORT
IMPORT
IMPORT
IMPORT
IMPORT
TO IMPORT CONFIGURATION, INSERT
MEMORY STICK AND WAIT FOR INSTRUCTIONS .
MEMORY STICK READY
a -
b -
c -
d -
e -
27293
IMPORT CONFIG
TO IMPORT
Tank configuration
Trim configuration
Steering
Depth configuration
Units and application preferences
27309
90-8M0070299 MAY 2012
eng