Table of Contents
Advertisement
Using Troll Control
The "TROLL CONTROL" screen allows you to maintain trolling speed without using the throttle. Minimum and maximum trolling
speeds depend on your engine type. Troll control is automatically cancelled if you move the throttle or shift into neutral gear. To
use troll control, the engine must be in gear and at idle.
Setting Troll Control
IMPORTANT: Do not leave the helm while using troll control.
1.
The engines must be running and in gear to activate troll control. The screen will show the engine as "NOT READY" in a
red box below the engine RPM if an engine is not in gear and running.
2.
With the engine running at idle, shift into forward or reverse gear. The display screen below RPM will change to
"AVAILABLE." This lets the operator know the troll control feature is now available.
3.
Press the check button to edit the troll control speed.
4.
For multiple engines, use the up and down arrow buttons to select which engines to control.
90-8M0070299
MAY 2012
eng
AVAILABLE
STBD : Not Engaged
Section 5 - Propulsion Menu
AVAILABLE
27741
27739
Page 81
Hide quick links:
Advertisement
Chapters
Table of Contents
