Alarms
Menu Option
Active Alarms
Alarm History
System Info
Menu Option
Displays the VesselView software version and other data.
Software Info
Hardware Info
Checking Status Using the Status Bar
VesselView displays important information in the status bar at the top of each screen. The status bar displays up to four
different icons and messages. Notices of conditions that may need attention (such as warnings, fuel level alerts, and faults)
appear as an icon on the left side of the status bar. The fault text will temporarily replace the status bar icons until the fault is
cleared. If more than one fault has occurred, the faults will appear one after the other in the sequence they occurred. To clear a
fault message from the status bar after the fault has been corrected, press the "X" button.
90-8M0070299
MAY 2012
eng
Description
Displays active alarms.
Displays alarms in the history.
Description
Displays VesselView hardware information.
Section 3 - Screen Overview and Operation
Screen
STBD
STBD
STBD
STBD
STBD
STBD
STBD
STBD
STBD
Screen
34515
34516
27426
27427
Page 45