Xc - Explicit Command; This Command Sets The Intended Zone To A Specific Level Between The Maximum And - Lutron Electronics RadioTouch RTA-RS232 Setup And Installation Manual

Device Control Commands
XC – Explicit Command
This command sets the intended zone to a specific level between the maximum and minimum levels.
:XC,[Zone Number],[Level]<CR>
Zone Number
Level
Examples:
:XC,1,57<CR>
:XC,4,OFF<CR>
:XC,5,ALLUP<CR> Sets Sivoia
Table 1 – Explicit Zone Levels
Level
Discrete Number Light intensity in percent.
(0-100)
0
0% ≤ Level ≤ 100 %
ONLAST If Zone currently OFF, sets zone to
previous level; or if currently ON,
stays at current level
OFF Sets light level to 0%.
ALLUP N/A
ALLDOWN N/A
Affected Zone (0-9)
Level to set Affected Zone - See Table 1 for in-depth explanation
Sets level for Zone #1 to 57%
Tells Zone #4 to go off
Motorized Shades on Zone #5 to the full open position
®
Lights
OFF
Sivoia Motorized
®
Window Treatments
N/A
N/A
N/A
Moves window treatments
to the fully open position
Moves window treatments
to the fully closed position
RadioTouch Setup Guide for RTA-RS232
TM
Contact
Closures
N/A
N/A
N/A
N/A
N/A
23