Workflow - Zetor PRIMO HT 20 NC Operator's Manual

Safety measures for handling implements
1. When connection and disconnecting implements to the tractor, make sure that there are no people
between the tractor and the implement or around the tractor and implements.
2. Only connect and disconnect implements on a safe and flat surface.
3. When installing heavy implements, install weights on the front of the tractor.
4. When adjusting the implement, apply the parking brake beforehand, stop the engine, and set the PTO
switch to the OFF position.
5. Use only towing equipment to tow anything.
Warning:
Carefully read the instructions on the implement's warning labels before starting work.

To eliminate injuries caused by improper use of the implement, read the implement's operating

instructions carefully and perform the work safely and carefully.
Installing an improper implement can lead to injury. Only install implements specified by the

manufacturer.

WORKFLOW

91