Front Link Assembly - Zetor PRIMO HT 20 NC Operator's Manual

Front Link Assembly

1- Lever Groove with Pivot Point
2- Front Lever
3 - Front Link
4- Lever with Pivot Point
5- Front Link Bracket
6 - U Pin
1. Place the front lever to the front link bracket.
2. Pull the U pin and secure it. Then lower the front lever.
3. Hook the front link by the lever with the pivot point and lift the front lever.
4. Release the U pin to secure the front lever.
NOTE
When the front link is hooked with the lever with the pivot point, the normal position of the lever
groove with the pivot point is open down.
Notice:
Check that the front lever is safely secured with the L pin.

74
MOWER DECK
PRIMOHT20NC_0069