Implement Lowering Speed Control Dial - Zetor PRIMO HT 20 NC Operator's Manual

Implement Lowering Speed Control Dial

1 - Implement Lowering Speed Control Dial
This control dial is used to adjust the lowering speed of the implement.
Set the lowering speed of the implement according to the type of implement and the working environment.
Warning:
Under the following conditions, set to the Lock position to prevent the implement from falling:
When driving on public roads

When replacing the rotavator blade or removing straw and grass

When performing service work on implements

Reducing lowering speed

Turn the control clockwise (lower speed).
Increasing lowering speed

Turn the control anticlockwise (higher speed).
Lock

Turn the control clockwise (lower speed) up to the
stop.
TRACTOR CONTROLS
PRIMOHT20NC_0046
PRIMOHT20NC_0047
55